manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 129 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 129

Features

4. For a transfer with consultation, announce the call.

■ 

If the person can take the call, hang up.

The call is transferred.

■ 

If the person cannot take the call, press the line

button with the held call to return to the caller.

To Transfer to an Outside Number

Before you try to transfer a call to an outside number, check
with your system manager. Your communications system

may have restrictions on outside transfers.

NOTE:

Calls transferred to outside numbers may vary in
transmission quality.

1. Press  Transfer.

The call is put on hold automatically.

2. Press a line button to get an outside line, or press an

SA  button and dial the dial-out code.

You hear a dial tone.

3. Dial the outside number.

■ 

If the person is available, hang up.

The call is transferred.

■ 

If the person is unavailable, press the  SA  or line

button with the held call and take a message.

Transfer

4-61

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments