Asus P5E3 Premium WiFi-APn User Manual Download Page 160

Page: 160 / 200

5-42

Chapter 5: Software support

To install the Express Gate Updater, launch the installer and follow on-screen

prompts.

To use the Express Gate Updater, launch the application and follow on-screen

prompts.

The Updater can preserve your Express Gate settings and personal data (web

browser bookmarks, etc.) while doing an update. Use the checkbox “Keep user

profile” to decide whether the Updater should do so.
Clearing the user data is useful in the rare case where corrupt settings prevent the

Express Gate environment from launching properly.

The first time wizard will run again when you enter the Express Gate

environment after clearing its settings.

Summary of Contents for P5E3 Premium WiFi-APn









































































































































































































Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands

Asus P5E3 Premium WiFi-APn, User Manual

Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands