Asus P5E3 Premium WiFi-APn User Manual Download Page 147

Page: 147 / 200

ASUS P5E3 Premium/WiFi-AP @n

5-29

Playback Settings

To configure the playback settings, click the

Playback

button on the control

panel. You can adjust the volume of the

Speakers

and

SPDIF

Interface

mute the audio.

Preset settings

Click and expand the drop-down menu

to select your preferred Digital Signal

Processing (DSP) preset. Move the

sliders to customize the values of

Voice Clarity

Dynamics

Brilliance

and

Deep Bass

of each preset.

Click

Save

to save the changes to

the current preset. Or, click

Reset

discard the changes and restore the

preset to the factory defaults.

Surround settings

Allows you to change the settings

of the stereo speakers. Move the

sliders to change the listener position

or adjust the center channel volume.

Press the

Test Speakers

button to

perform speaker test.

Port settings

Click this port settings tab to display the rear panel ports configuration for

the speakers or rear panel digital port configuration for the SPDIF interface.

Summary of Contents for P5E3 Premium WiFi-APn









































































































































































































Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands

Asus P5E3 Premium WiFi-APn, User Manual

Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands