Asus P5E3 Premium WiFi-APn User Manual Download Page 12

Page: 12 / 200

xii

P5E3 Premium/WiFi-AP @n

specifications summary

CPU

LGA775 socket for Intel

Core™2 Extreme /

Core™2 Quad / Core™2 Duo / Pentium

Extreme /

Pentium

D / Pentium

4 Processors

Compatible with Intel

05B/05A/06 processors

Intel

next generation 45nm Multi-Core CPU

* Refer to www.asus.com for Intel CPU support list

Chipset

Intel

X48 / ICH9R with Intel

Fast Memory Access

Technology

System Bus

1600 / 1333 / 1066 / 800 MHz

Memory

4 x DIMM, max. 8GB, DDR3 2000 (O.C.) / 1800 (O.C.) /1600 /

1333 / 1066 / 800 MHz, ECC, un-buffered memory

Dual channel memory architecture

Supports Intel

Extreme Memory Profile (X.M.P.)

* For X.M.P. support, CPUs with FSB 1333 or above are

recommended.

** Refer to www.asus.com or this user manual for the

Memory QVL (Qualified Vendors Lists).

Expansion Slots

3 x PCIe x16 (blue @PCIe 2.0 x16 link, black @PCIe x4

or x1 link) with CrossFire™ suppport

1 x PCIe x1

2 x PCI

Storage

Intel

ICH9R Southbridge

- 6 x SATA 3.0 Gb/s ports

- Intel

Matrix Storage, supporting RAID 0,1, 5 and 10

JMicron

JMB363 PATA and SATA controller

- 1 x UltraDMA 133/100/66 for up to 2 PATA devices

- 2 x External SATA 3 Gb/s ports (SATA On-the-Go)

- Supports SATA RAID 0, 1 and JBOD

LAN

Dual Gigabit LAN controllers, featuring AI NET2

Marvell

88E8056 PCI-E Gigabit LAN controller

Realtek

RTL8110SC PCI Gigabit LAN controller

Wireless LAN

ASUS WiFi-AP @n

- 300 Mbps* IEEE 802.11n (Draft) and backwards

compatible with IEEE 802.11b/g

- Software Access Point mode

* The maximum wireless signal rate is IEEE 802.11n

Draft specifications. Actual throughput will vary

depending on the wireless environment and other

parameters.

Audio

ADI

AD1988B 8-channel High Definition Audio CODEC

- Supports Jack-Sensing, Enumeration, Multi-streaming

technology

- Coaxial / Optical S/PDIF out ports at back I/O

(continued on the next page)

Summary of Contents for P5E3 Premium WiFi-APn









































































































































































































Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands

Asus P5E3 Premium WiFi-APn, User Manual

Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands