Asus P5E3 Premium WiFi-APn User Manual Download Page 34

Page: 34 / 200

2-8

Chapter 2: Hardware information

5. Position the CPU over the

socket, making sure that

the gold triangle is on the

bottom-left corner of the

socket then fit the socket

alignment key into the

CPU notch.

Alignment key

Gold triangle mark

6. Close the load plate (A), then

push the load lever (B) until it

snaps into the retention tab.

7. If installing a dual-core CPU,

connect the chassis fan cable

to the CHA_FAN1 connector to

ensure system stability.

The CPU fits in only one correct orientation. DO NOT force the CPU into the

socket to prevent bending the connectors on the socket and damaging the CPU!

The motherboard supports Intel

LGA775 processors with the Intel

Enhanced

Memory 64 Technology (EM64T), Enhanced Intel SpeedStep

Technology

(EIST), and Hyper-Threading Technology. Refer to the Appendix for more

information on these CPU features.

4. Lift the load plate with your thumb

and forefinger to a 100º angle (A),

then push the PnP cap from the load

plate window to remove (B).

Load plate

CPU notch

Summary of Contents for P5E3 Premium WiFi-APn









































































































































































































Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands

Asus P5E3 Premium WiFi-APn, User Manual

Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands