Asus P5E3 Premium WiFi-APn User Manual Download Page 76

Page: 76 / 200

4-4

Chapter 4: BIOS setup

To update the BIOS using EZ Flash 2:
1. Visit the ASUS website (www.asus.com) to download the latest BIOS file for

the motherboard.

2. Save the BIOS file to a floppy disk or a USB flash disk, then restart the

system.

4.1.2

ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go

through the long process of booting from a floppy disk and using a DOS-based

utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing

<Alt> + <F2> during the Power-On Self Tests (POST).

(2) Enter BIOS setup program. Go to the

Tools

menu to select

EZ Flash2

and press <Enter> to enable it.

You can switch between drives by pressing <Tab> before the correct file

is found. Then press <Enter>.

3. You can launch the EZ Flash 2 by two methods.

(1) Insert the floppy disk / USB flash disk that contains the BIOS file to the

floppy disk drive or the USB port.

Press <Alt> + <F2> during POST to display the following.

• This function can support devices such as USB flash disk, or floppy disk

with

FAT 32/16

format and single partition only.

• DO NOT shut down or reset the system while updating the BIOS to prevent

system boot failure!

4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update

process and automatically reboots the system when done.

ASUSTek EZ Flash 2 BIOS ROM Utility V3.06

Current ROM

Update ROM

Note

[Enter] Select or Load [B] Backup [ESC] Exit

[Tab] Switch [Up/Down/Home/End] Move

FLASH TYPE:

MXIC 25L1605A

PATH:

A:\

BOARD:

P5E3 Premium

VER:

0110

DATE:

01/07/08

BOARD:

Unknown

VER:

Unknown

DATE:

Unknown

Summary of Contents for P5E3 Premium WiFi-APn









































































































































































































Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands

Asus P5E3 Premium WiFi-APn, User Manual

Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands