Asus P5E3 Premium WiFi-APn User Manual Download Page 62

Page: 62 / 200

2-36

Chapter 2: Hardware information

10. Optical drive audio connector (4-pin CD)

This connector allows you to receive stereo audio input from sound sources

such as a CD-ROM, TV tuner, or MPEG card.

11. Digital audio connector (4-1 pin SPDIF, for ASUS HDMI VGA card)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF)

port(s). If you are using ASUS HDMI-equipped graphics card, connect the

HDMI card to this connector with a S/PDIF out cable.

The ASUS HDMI-equipped graphics card and S/PDIF out cable are purchased

separately.

P5E3 PREMIUM

P5E3 Premium/WiFi-AP @n

Internal audio connector

Right Audio Channel

Left Audio Channel

Ground

P5E3 PREMIUM

P5E3 Premium/WiFi-AP @n

Digital audio connector

+5V

SPDIFOUT GND

SPDIF_OUT

Summary of Contents for P5E3 Premium WiFi-APn









































































































































































































Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Asus P5E3 Premium WiFi-APn, User Manual, Page: 62 / 200

Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews: