Asus P5E3 Premium WiFi-APn User Manual Download Page 179

Page: 179 / 200

ASUS P5E3 Premium/WiFi-AP @n

5-61

To install the RAID driver in Windows XP:
1. During the OS installation, the system prompts you to press the <F6> key to

install third-party SCSI or RAID driver.

2. Press <F6> then insert the floppy disk with RAID driver into the floppy disk

drive.

3. When prompted to select the SCSI adapter to install, make sure you select

Intel(R) SATA RAID Controller (Desktop ICH9R) and JMicron JMB363.

4. Follow the succeeding screen instructions to complete the installation.

To install the RAID driver in Windows

Vista:

1. Insert the floppy disk/USB device with RAID driver into the floppy disk drive/USB

port.

2. During the OS installation, select

JMicron JMB363.

3. Follow the succeeding screen instructions to complete the installation.

Summary of Contents for P5E3 Premium WiFi-APn









































































































































































































Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands

Asus P5E3 Premium WiFi-APn, User Manual

Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands