Asus P5E3 Premium WiFi-APn User Manual Download Page 33

Page: 33 / 200

ASUS P5E3 Premium/WiFi-AP @n

2-7

3. Lift the load lever in the direction of

the arrow to a 135º angle.

2. Press the load lever with your thumb (A), then move it to the left (B) until it is

released from the retention tab.

Retention tab

Load lever

This side of the socket box

should face you.

PnP cap

To prevent damage to the socket pins, do not remove the PnP cap unless you

are installing a CPU.

2.3.1

Installing the CPU

To install a CPU:
1. Locate the CPU socket on the motherboard.

Before installing the CPU, make sure that the cam box is facing towards you

and the load lever is on your left.

P5E3 PREMIUM

P5E3 Premium/WiFi-AP @n

CPU Socket 775

Summary of Contents for P5E3 Premium WiFi-APn









































































































































































































Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands

Asus P5E3 Premium WiFi-APn, User Manual

Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands