Asus P5E3 Premium WiFi-APn User Manual Download Page 64

Page: 64 / 200

2-38

Chapter 2: Hardware information

13. ASUS Q-Connector (system panel)

You can use the ASUS Q-Connector to connect/disconnect chassis front

panel cables in a few steps. Refer to the instructions below to install the

ASUS Q-Connector.

1. Connect the front panel cables to the

ASUS Q-Connector.

Refer to the labels on the Q-Connector

to know the detailed pin definitions, then

match them to the respective front panel

cable labels.

2. Install the ASUS Q-Connector to the

system panel connector, making sure

the orientation matches the labels on the

motherboard.

3. The front panel functions are now enabled.

The figure shows the Q-Connector properly

installed on the motherboard.

Summary of Contents for P5E3 Premium WiFi-APn









































































































































































































Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands

Asus P5E3 Premium WiFi-APn, User Manual

Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands