Asus P5E3 Premium WiFi-APn User Manual Download Page 52

Page: 52 / 200

2-26

Chapter 2: Hardware information

16. USB 2.0 ports 3 and 4.

These 4-pin Universal Serial Bus (USB) ports are

available for connecting USB 2.0 devices.

17. Optical S/PDIF Out port

. This port connects an external audio output device

via an optical S/PDIF cable.

18. USB 2.0 ports 5 and 6.

These 4-pin Universal Serial Bus (USB) ports are

available for connecting USB 2.0 devices.

• DO NOT insert different connectors to the external SATA ports.
• DO NOT unplug the external Serial ATA box when a RAID 0 or RAID 1 is

configured.

• Before creating a RAID set using Serial ATA hard disks, make sure that you

have connected the Serial ATA signal cable and installed Serial ATA hard

disk drives; otherwise, you cannot enter the JMicron RAID utility and SATA

BIOS setup during POST.

• If you intend to create a RAID configuration using this connector, set the

J-Micron eSATA/PATA Controller Mode in the BIOS to [RAID]. See section

4.5.3 Onboard Device Configuration

for details.

• When using hot-plug and NCQ, set the J-Micron eSATA/PATA Controller

Mode in the BIOS to [AHCI]. See section

4.5.3 Onboard Device

Configuration

for details.

• Before creating a RAID set, refer to

5.4.4 JMicron

RAID Configuration

the manual bundled in the motherboard support DVD.

Summary of Contents for P5E3 Premium WiFi-APn









































































































































































































Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands

Asus P5E3 Premium WiFi-APn, User Manual

Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands