Asus P5E3 Premium WiFi-APn User Manual Download Page 39

Page: 39 / 200

ASUS P5E3 Premium/WiFi-AP @n

2-13

2.4

System memory

2.4.1

Overview

The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory

Modules (DIMM) sockets.
A DDR3 module has the same physical dimensions as a DDR2 DIMM but is

notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules

are developed for better performance with less power consumption.
The figure illustrates the location of the DDR3 DIMM sockets:

P5E3 PREMIUM

P5E3 Premium/WiFi-AP @n

240-pin DDR3 DIMM sockets

DIMM_A2

DIMM_A1

DIMM_B2

DIMM_B1

Channel

Sockets

Channel A

DIMM_A1 and DIMM_A2

Channel B

DIMM_B1 and DIMM_B2

2.4.2

Memory configurations

You may install 512 MB, 1 GB, and 2 GB unbuffered ECC DDR3 DIMMs into the

DIMM sockets.

Recommend memory configuration

Mode

Sockets

DIMM_A1

DIMM_A2

DIMM_B1

DIMM_B2

Single-channel

populated

Dual-channel (1)

populated

Dual-channel (2)

populated

Summary of Contents for P5E3 Premium WiFi-APn









































































































































































































Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands

Asus P5E3 Premium WiFi-APn, User Manual

Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands