Asus P5E3 Premium WiFi-APn User Manual Download Page 85

Page: 85 / 200

ASUS P5E3 Premium/WiFi-AP @n

4-13

DMA Mode [Auto]

Selects the DMA mode.

Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0]

[MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology.

Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.

Configuration options: [Disabled] [Enabled]

SATA Configuration [Enhanced]

Configuration options: [Disabled] [Compatible] [Enhanced]

Configure SATA as [IDE]

This sub-item appears only when you set the

SATA Configuration

item to

[Compatible] or [Enhanced] and allows you to set the SATA configuration.

Configuration options: [IDE] [RAID] [AHCI]

• If you want to use the Serial ATA hard disk drives as Parallel ATA physical

storage devices, keep the default setting [IDE].

• If you want the Serial ATA hard disk drives to use the Advanced Host

Controller Interface (AHCI), set this item to [AHCI]. The AHCI allows

the onboard storage driver to enable advanced Serial ATA features that

increases storage performance on random workloads by allowing the drive

to internally optimize the order of commands.

• If you want to create a RAID 0, RAID 1, RAID 5, RAID 10, or the Intel®

Matrix Storage Technology configuration from the Serial ATA hard disk

drives, set this item to [RAID].

SATA Configuration

SATA Configuraton

[Enhanced]

Configure SATA as

[IDE]

Hard Disk Write Protect

[Disabled]

SATA Detect Time Out (Sec)

[35]

4.3.6

SATA Configuration

The items in this menu allow you to set or change the configurations for the SATA

devices installed in the system. Select an item then press <Enter> if you want to

configure the item.

Options

Disabled

Compatible

Enhanced

Summary of Contents for P5E3 Premium WiFi-APn









































































































































































































Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands

Asus P5E3 Premium WiFi-APn, User Manual

Search results

Summary of Contents for P5E3 Premium WiFi-APn

Reviews:

Related manuals for P5E3 Premium WiFi-APn

Brands by name

Popular brands