Associated Research HYPOTULTRA III 7620, Operation And Service Manual, Page: 94 / 148

86
RS?
Read Scanner Status command will respond with a value that identifies the number scanners
installed or connected to the instrument. Values 0 – 4 will indicate if there are no scanners
connected, one Internal or External scanner, or if both an Internal and an External scanner are
connected.
LF?
Lists the file name of the memory loaded into active memory (RAM).
LFN?
Lists the memory number of the active memory file loaded into active memory (RAM).
LF <memory number>?
List the file name of any of the 50 memories.
LP?
Lists the prompt that is created for the individual step that has been selected within active
memory (RAM).
LP <step number>?
Lists the prompt that has been created for of one of the steps of the file within active memory
(RAM).
LS?
Lists all the Parameters for the individual step that is currently selected. See the ADD command
for the list of parameters. A comma (,) will separate each parameter and will be preceded with
the step number.
LS <step number>?
Lists all the Parameters for the individual step indicated by step number = 1-30. See the ADD
command for the list of parameters. A comma (,) will separate each parameter and will be
preceded with the step number.