Associated Research HYPOTULTRA III 7620, Operation And Service Manual, Page: 100 / 148

92
9. Options
Introduction
This section contains a list and descriptions of available factory installed options at the time of
this printing. The list of options contains an option code number that can be referenced on the
data plate on the rear panel of the unit.
Option Label
On the rear panel of the instrument, you will find a label that contains the option code.
For example, your options code would appear as follows:
Fitted with option 01 ............................................................. OPT: 01
Fitted with option 01 and 08................................................... OPT: 0108
HypotULTRA III Options
Option List
Code Description
01 Internal 8 Channel Scanner with Continuity
02 Internal 4 Channel Scanner with Continuity
06 Dual Remote Test Switches
08 Printer Card
10 GPIB
14 3mA AC Output
15 5mA Output
16 Ethernet Card
17 Data Storage Card
01 8 Channel Scanner with Continuity
The Scanner option provides 8 high voltage/continuity channels on the rear panel. The High
Voltage/Continuity channels can be set to a High (Continuity) or Low level giving the capability
to test from one channel to another channel or from any channel to a common Low or Return
point. The channels can be connected in parallel if desired but there is only one leakage current
measurement for all channels.
The scanner will provide output to multiple test points and will have the same operation
specifications that apply to the standard instrument.
Setting up the scanner channels
1. From the Test parameter review screen (refer to section 4.2.4), scroll the highlighted area to
the scanner parameter using the “
< >
,
∧
,
∨
” soft keys.
2. Press the “Edit” soft key. The Scanner channel edit screen will now be displayed.
3. Use the “
< >
” soft keys to select which scanner channel you want to edit then press the
change key to select H, L, O. The three different selectable scanner states are L (scanner