ashtech DG14, Reference Manual

Page: 237 / 390

Raw Data Commands 217
Raw Dat
a Commands
SIT: Site Name for Observation Session
$PASHS,SIT,s1
This command sets a site name for your observation session, where s1 is a user-
defined string of 4 characters. The site name is captured in the PBN message; if a
site name is not defined by the user, this part of the PBN message is occupied by
four question marks. You can view the current site name by entering the query
command
$PASHQ,RAW and checking the SIT field.
Examples
Enter the following command to set site name to 0001:
$PASHS,SIT,0001
Enter the following command to set the site name to SQR1:
$PASHS,SIT,SQR1
float 3*4 Satellite ECEF velocity X’, Y’, Z’ (m/s).
long 4 tow—Time within week in GPS time scale when
SBAS almanac was received.
char 1 wn—Week number in GPS time scale when SBAS
almanac was received.
char 1 Satellite number (33 to 64)
unsigned short 2 Checksum computed by breaking the structure into
40 unsigned shorts, adding them together and
taking the least significant 16 bits of the result.
Total Bytes: 38 (51 including header and <LF><CR>)
DEFAULT SETTING
SIT ????
Table 7.19. $PASHR,SAW Data String (Continued)
Field Bytes Content