M
ODULO
9
–
C
ONTROLLI
PRIMA
DELLA
MESSA
IN
STRADA
2007
-1.0 – ITA
Modulo 9 / Pag.
1
Prima di iniziare a guidare
Attenzione: seguire attentamente i prossimi passi prima di mettere in strada la ARx-540:
1.
Controllo Radio
Una volta installata la radio ed il relativo servo controllarne il corretto funzionamento:
posizionando lo stick (leva radio) sterzo verso destra la ruota anteriore deve sterzare verso
sinistra. Agire sul reverse canale sterzo se questo non accade.
2.
Prova volano Meccanico
Alloggiare la moto sul cavalletto assicurandosi che la ruota posteriore non tocchi terra.
Tenendo la moto con una mano sulla sella
(ATTENZIONE: EVITARE ASSOLUTAMENTE di
AVVICINARE LA MANO ALLA RUORA POSTERIORE E/O VICINO ALLA CATENA PER EVITARE DI
FERIRSI!!!)
accelerare al massimo per qualche secondo, controllare anche il corretto senso di
marcia della ruota posteriore. Frenare completamente ed assicurarsi che il volano (dentro la
ruota posteriore) continui a ruotare constatando delle leggere vibrazioni.
3.
Prova volano Elettrico
Alloggiare la moto sul cavalletto. Dopo avervi collegato il pacco batterie accendere il volano.
Se dovesse partire e fermarsi, dopo aver verificato la corretta alimentazione, adottare una
delle seguenti tecniche:
-
Al momento dell’accensione alzare la ruota anteriore portando la moto in verticale per
favorire la partenza.
-
Appena il regolatore taglia corrente spegnere l’alimentazione al volano ed accenderla
immediatamente dopo, ripeter l’operazione fin quando il volano non prende i giri e
rimane acceso.
Una volta compiuti questi ultimi passaggi ed averne verificato la corrispondenza rispetto a quanto
indicato, la ARx-540 è pronta all’uso.
BUON DIVERTIMENTO DA PARTE DI AR RACING!