M
ODULO
8
–
C
OMPLETAMENTO MOTO
–
ASSEMBLAGGIO FINALE
P
HASE
8
–
F
INISHING THE BIKE
–
F
INAL ASSEMBLING
2007 – 2.0 – ITA
/I
ng Modulo 8 / Pag. 12
Mod
num
Istruzione – Instruction
Fotografie - Pictures
8.
33.
Collegamento
cavo
alimentazione
giroscopio elettrico.
Nel caso di utilizzo di un regolatore
diverso collegare i cavi provenienti dal
regolatore alla batteria, meglio se
tramite un interruttore.
Install the electric gyro feeling pug to
the fan plug of the esc.
In case you’re using a differen ESC you
can connect the feeding wires directly
to the main battery, better with a
switch
8.
34.
Una volta data corrente verificare che
il voltaggio alle estremità del perno
ruota posteriore sia pari alla tensione
della batteria, se così non fosse
verificare tutti i collegamenti.
Once plugged the battery check that
the tension at the ends of the rear
wheel shaft is the same as the tensio to
the battery poles, if lower check all the
connections.
35.