Artesyn Centellis 2100 Shelf Release 3.0, Installation And Use Manual

Page: 95 / 190

Chapter 4
Centellis 2100 Shelf Release 3.0 Installation and Use (6806800T37D)
95
FRU Installation
This chapter provides information about installation and removal of AdvancedTCA blades,
RTMs, shelf managers and hub boards, power supply units, DC power entry modules, circuit
breaker cover, fan trays, and air filters.
4.1 Installing and Removing RTMs and Blades
The installation and removal procedures of AdvancedTCA blades and RTMs depend on the type
of blade or RTM. For a description of these procedures, refer to the documentation of the
respective blade or RTM.
Note that the blades and RTMs are installed horizontally in a Centellis 2100 shelf, while they are
usually installed vertically. Thus, the lower handle mentioned in blade descriptions
corresponds to the right handle of a blade installed in a Centellis 2100 shelf, and the upper
handle corresponds to the left handle. For RTMs which are mounted at the rear, the upper
handle corresponds to the right handle and the lower handle to the left handle.
The system will ship with a filler blade installed into unpopulated AdvancedTCA slots. You
have to remove the filler blade before installing AdvancedTCA blades.