Artesyn Centellis 2100 Shelf Release 3.0, Installation And Use Manual

Page: 71 / 190

Site Preparation
Centellis 2100 Shelf Release 3.0 Installation and Use (6806800T37D)
71
To guarantee proper blade operation, you have to make sure that the temperatures at the
locations specified in the following are not exceeded. If not stated otherwise, the temperatures
should be measured by placing a sensor exactly at the given locations.
Table 2-2 Critical Temperature Limits
Component Maximum Temperature
Air inlet (system’s front) 55 °C (131 °F)
Air outlet (system’s rear) 70 °C (158 °F)
>70 °C (158 °F) and maximum 90 °C (194 °F): the cables
must be isolated and must be approved to be used in
this temperature range.
>70 °C (158 °F) and maximum 90 °C (194 °F): If you
operate the system at >70 °C and the service personnel
may touch the components, you have to make sure that
the cables are isolated and that the “hot surface” icon is
attached. The cables must be approved to be used in
this temperature range.