Artesyn Centellis 2100 Shelf Release 3.0, Installation And Use Manual, Page: 55 / 190

Introduction
Centellis 2100 Shelf Release 3.0 Installation and Use (6806800T37D)
55
Optional components:

IPMC block

10GBase-SFP+ uplink interface

Synchronization clock channel
Designers of user cards should contact the Artesyn Embedded Technologies engineering team
to obtain the detailed pin-out of the backplane connectors and mechanical data.
Eye Damage
Optical SFP/SFP+ modules may emit laser radiation when no cable is connected.
Avoid staring into open apertures to avoid damage to your eyes.
Personal Injury and Damage of the RTM and SFP/SFP+ Modules
Installing and using SFP/SFP+ modules which are not fully certified and which do not meet
all relevant safety standards may damage the RTM and the SFP/SFP+ modules and may lead
to personal injury.
Only use and install SFP/SFP+ modules which are fully certified and which meet all relevant
safety standards.
Personal Injury
Optical SFP/SFP+ modules may be classified as laser products. When installing and using any
of these SFP/SFP+ modules, the regulations which correspond to the respective laser class
apply to the whole RTM. Not complying to these regulations, may lead to personal injury.
When installing and using optical SFP/SFP+ modules which are classified as laser products,
make sure to comply to the respective regulations.