Artesyn Centellis 2100 Shelf Release 3.0, Installation And Use Manual

Page: 176 / 190

Software
Centellis 2100 Shelf Release 3.0 Installation and Use (6806800T37D )
176
11.1.2 Firmware Upgrade
The procedures and tools for software upgrades differ depending on what component needs
to be upgraded. Available tools for firmware upgrades are:

Firmware Upgrade Utility (FCU): part of BBS

Firmware Update Management Instrument (FUMI): part of HPI-B
The following table shows which tools you can use and where you can find a description of how
to do it.
Please refer to the Release Notes to find out about software dependencies.
11.1.2.1 IPMI Firmware Upgrade
Centellis 2100 Fan Tray IPMI Firmware:
The fcu utility can be used to upgrade the Centellis 2100 Fan tray with the following syntax:
Artesyn recommends to always use FUMI if available.
Table 11-2 Available Software Upgrade Tools
Procedure Tool Document/Chapter
MF106 payload upgrade
MF106 firmware upgrade
Fan tray IPMC firmware upgrade FUMI System Management Interface Based on HPI-B (Centellis
CO 31kX/4100/2000) User’s Guide
Chapter: Using the Firmware Update Management
Instrument
BBS software upgrade on any
blade - Install the files of the new software version as
described in the
Basic Blade Services Software
Programmer’s Reference of the respective blade
Chapter: Installation
Node blade firmware upgrade Depends on the node blade. Please refer to the documentation of
the respective blade.