Artesyn BajaPPC-750, User Manual

Page: 185 / 215

10-46 BajaPPC-750: Monitor
May 2002
For a detailed memory map, type
help memmap
.
DEFINITION
int Help(char *Name)
10.12 Command Errors and Screen Messages
Most commands return an explanatory message for misspelled or mistyped com-
mands, missing arguments, or invalid values. Table 10-5 lists errors that can be
attributed to other causes, especially errors that indicate a problem in the nonvol-
atile memory configuration.
Table 10-5. Error and Screen Messages
Message Source and Suggested Solution
Error while clearing NV memory.
Error while reading NV memory.
Error while storing NV memory.
NV memory has become corrupted. Use the nvinit
command to restore defaults. If the problem persists,
contact Customer Services
1
.
1. Artesyn Communications Products, 1-800-327-1251.
Customer Services email support@artesyncp.com, Test Services email serviceinfo@artesyncp.com.
Hit ‘H’ to skip auto-boot... Consult the introduction to this chapter for information
about power-up conditions.
No help for ___. The topic for help was misspelled or is not available.
Check the spelling. If the topic was a command name,
use the
help command to check the spelling of the
command. You must use the full command name, not
an abbreviation.
Power-up Test FAILED. A failed test could mean a hardware malfunction.
Report the error to Test Services
1
.
Unknown boot device. The boot device is invalid. Use nvdisplay to check and
edit the ‘BootParams’ group, “BootDev” field. Save a
new value with
nvupdate .
Warning – ISA bridge not initialized,
PCI master abort detected The ISA bridge did not receive one or more initialization
commands. Interrupts will be unstable. Report the error
to Customer Services
1
.
Unexpected _____ Exception at
_____. There are many possible sources for this error.
If the error is displayed during boot, it could mean that
autoboot is enabled and invalid parameters are being
used.
If the error is displayed at reset or power-up and auto-
boot is
not enabled, report the error to Customer
Services
1
.
If the error is displayed after a command has been exe-
cuted, an attempt to perform an operation that causes
an exception has probably been made.
Warning NV memory is invalid -
using defaults. Consult the introduction to this chapter for information
about reset conditions.