Arjo Ninjo Technical Manual Download Page 26

Page: 26 / 60

&RQWURORIWKHRXWSXWVOLQHV±

Note!

)RUFHUWDLQRXWSXWVWREHDFWLYDWHGWKHGRRUPXVWEHFORVHG

and locked.

The lines are used to control the digital outputs. Authorization level
B or C required.

Line

Output

Function

Valve, cold water

Valve, hot water.

Ventilator

Pump, rinse-aid

Pump, descaler

Main pump

Steam Generators

Pump, process agent

Unlock door (1 runs unlocking
sequence)

Lock door (1 runs locking sequence)

First press

to select either:

• 00 = Output not active

• 01 = Output active

Then press

to control the output.

5HDGLQJWHPSHUDWXUHOLQH

The line shows the current temperature sensor value in the chosen
temperature scale. This value cannot be changed.

Display range: 1–100°C/34–212°F in 1° intervals.

5HDGLQJLQGHSHQGHQWWHPSHUDWXUHOLQH

The line shows the current temperature sensor value in the chosen
temperature scale. This value cannot be changed.

Display range: 1–100°C/34–212°F in 1° intervals.

&DOLEUDWLQJWHPSHUDWXUHVHQVRUVOLQHV±

(this functionality is not available for AH1036512)

Used to calibrate temperature sensors.

• Line 77 is used for external temperature calibration.

• Line 78 is used for external temperature calibration.

Summary of Contents for Ninjo





























































Search results

Summary of Contents for Ninjo

Reviews:

Related manuals for Ninjo

Brands by name

Popular brands

Arjo Ninjo, Technical Manual

Search results

Summary of Contents for Ninjo

Reviews:

Related manuals for Ninjo

Brands by name

Popular brands