27
Calibration requires authorization level C. To calibrate:
1. Set the calibration box to 20°C.
2.
Wait until the display shows a stable value between 83
and
&RQ¿UPE\SUHVVLQJ
.
3. Select 90°C on the calibration box.
4.
Wait until the display shows a stable value between 367
and
&RQ¿UPE\SUHVVLQJ
.
0L[UDWLRIRUZDWHUOLQHQXPEHU±
The lines are used to set the mix ratio between the hot water and
WKHFROGZDWHUIRUWKHYDULRXVZDWHU¿OOLQJSKDVHVGXULQJDSURJUDP
cycle.
/LQHLVXVHGWRVHWWKHPL[UDWLRIRUWKH¿UVW¿OOLQJSKDVHOLQH
IRUWKHVHFRQG¿OOLQJSKDVHHWF
• 0% = cold water only
• 50% = half cold water and half hot water
• 100% = hot water only
Standard value for:
• line 91 is 0%.
• line 92 is 50%.
• line 93-95 is 100%.
Changing the settings requires authorization level C.
