15
3.2 Accessing the service program
Note!
You must enter your access rights code before you can
change anything in the program. If the numerical value
LVÀDVKLQJLWFDQEHFKDQJHG,ILWLVQRWÀDVKLQJHLWKHULW
cannot be changed or you do not have the access rights
to change it.
Note!
You must be in line number mode to quit the service
program.
Press and hold the
and
buttons. Then press
and hold
the buttons for 10 seconds.
The machine is now in service mode and line numbers appear
on the display.
Enter the service program (keep both buttons pressed
for 10 seconds).
Quit the service program (press the buttons for three
seconds).
Increase line number or numerical value. For rapid
feed, hold the button down.
Decrease line number or numerical value. For rapid
feed, hold the button down.
Shows the value for a line number/saves the numerical
value.
3.3 Operator password (line number 0)
The machine has three authorization levels:
•
Level A
for users; display only (code 0000)
•
Level B
for users; change (code 2000)
•
Level C
for service personnel, change
The code only protects against changes.
The authorization code must be entered in the same way as other
numerical values as described in the next section.
