IPX-100 system installation & configuration
Page-51
TELECOMMUNICATIONS
c.
Other Options
The other options column is to set the working parameters of this FXO port in the PBX as
below.
：
Toll Layer Outbound dialing toll settings as below
：
Allow Layer 1 Allow PSTN to dial in and allow the extension of level 1 to dial out.
Allow Layer 2 Allow PSTN to dial in and allow the extensions of level 1~2 to dial out.
Allow Layer 3 Allow PSTN to dial in and allow the extensions of level 1~3 to dial out.
Allow Layer 4 Allow PSTN to dial in and allow the extensions of level 1~4 to dial out.
Incoming Only Only PSTN outside line dialing is allowed.
Tie Trunk String cabinet dialing, incoming line when internal line dialing.
d.
Incoming Options
The incoming call selection field is used to select the dial-in route of this FXO port as below.
：
Incoming Rule
Incoming call, select which incoming line is processed when dialing the PATN
outside line, the options are as below
：
Disallow No incoming call is allowed.
others
Display all the incoming routes that have been set, and FXO_default
is the preset incoming route set by the system when setting quickly.
4-1-1-2
FXS Port
a.
General
The general setting column is used to set the basic operating parameters of this FXS, as below.
：
Extension
extension number.
Caller ID
Extension name, used as the name of the caller for internal dialing.
Outbound Caller ID
The extension dial-out name is used as the name of the outgoing caller
when dialing the SIP trunk. When not set, the system uses the
extension number as the name of the caller.
b.
Voicemail
The voicemail section is used to set the voicemail parameters of this FXS port, as below.
：
Enable Voicemail
Whether to enable the voicemail function, check to enable.
Access VM Password Password for access into your voicemail.
Maximum VM Calls
Maximum number of voicemails, up to 100 messages.
E-mail Address
Email address, which is used to send the address of the message
recording file after each caller's message.
