IPX-100 system installation & configuration
Page-53
TELECOMMUNICATIONS
d.
Other Options
The other options column is to set the working parameters of this FXS in the PBX, as below.
：
Call Group
The sub-group to which the extension belongs, the options are
Group1~Group30, a total of 30 groups.
Pickup Group The group that the extension can pick up can be a multi-group, and the number
and number are separated by commas (for example, if you set the first and
second groups, enter "1, 2").
Toll Layer
Outbound dialing toll settings, options are as follows
：
Allow Layer 1
Outbound dialing toll level 1.
Allow Layer 2
Outbound dialing toll level 2.
Allow Layer 3
Outbound dialing toll level 3.
Allow Layer 4
Outbound dialing toll level 4.
Allow Internal Call
Only internal extensions are allowed.
Operator Only Only allow to call the console group (RGP_default).
Answer Only
allow answer incoming call only.
4-1-1-3
KeyPhone Port
a.
General
The general setting column is used to set the basic operating parameters of this button phone,
as below.
：
Extension
extension number.
Caller ID
Extension name, used as the name of the caller for internal dialing.
Outbound Caller ID
The extension dial-out name is used as the name of the outgoing caller
when dialing the SIP trunk. When not set, the system uses the
extension number as the name of the caller.
b.
Voicemail
The voicemail column is used to set the voicemail parameters of this button phone, as below.
：
Enable Voicemail
Whether to enable the voicemail function, check to enable.
Access VM Password Password for access into your voicemail.
Maximum VM Calls
Maximum number of voicemails, up to 100 messages.
E-mail Address
Email address, which is used to send the address of the message
recording file after each caller's message.
