IPX-100 system installation & configuration
Page-55
TELECOMMUNICATIONS
4-1-2
Quick Settings
The quick setting is used for hardware first setting, hardware change, quick one-time basic setting,
and all hardware parameters use basic settings. Anotherpaging port, relay action settings are also
set in this section.
4-1-2-1
Card Solt
The card slot will display the card card installed in each slot of the IPX-100 and the current
settings of each slot. The user can first set the basic settings of all the cards in the section
(external line number, extension number, etc.). If the system is used for the first time, the
system will first set the preset value, and the user can modify it according to his own needs.
The detailed parameter settings of each hardware must be set in the 4-1-1 card setting point
and then set individually.
FXOport of external line options as below
：
Not Used
No Plugin
No card is installed on this port.
Paging Port
This port is used as the broadcast paging channel of the hardware. If you choose
to set it to paging, you cannot connect any PSTN line or phone. Otherwise, it will
interfere with the voice during broadcast.
CO01~CO99 External line number, total 99 lines,
please note each FXO port choose not to
repeat.
Note:
When you enter this setting, the system will check the settings of the matching card
hardware and system and mark the changed hardware and red box with the red box.
When the hardware has made any changes, you must perform a quick setup to confirm
that the changes are correct and to avoid errors in system operation.
