Aristel IPX-100 Installation Manual Download Page 67

Page: 67 / 114

IPX-100 system installation & configuration

Page-67

TELECOMMUNICATIONS

Destination If No Answer/Busy.

At this page sets the system should perform subsequent processing when the selected

extension is busy or unanswered after ringing.

The main items selected in the destination field are Hangup, Voicemail, Extension, and

Forward To. According to the user settings, the selectable items are IVR, Ring Group, Queue,

Time Condition, and Conference Room. described as follows

：

Hangup

Voicemail

Enable this extension to forward to voicemail by “Dialed Ext.”code.

IVR

Forward to auto-attendant.

Ring Group

Forward to ring group extension.

Extension

Forward to extension.

Queue

Forward to incoming call queue.

Time Condition

Set processing according to time conditions.

Conference Room

Forward to conference room.

Forward To

Transfer to the trunk line, please enter the outbound number

(outbound routing code + outside line number).

Summary of Contents for IPX-100



















































































































Search results

Summary of Contents for IPX-100

Reviews:

Related manuals for IPX-100

Brands by name

Popular brands

Aristel IPX-100, Installation Manual

Search results

Summary of Contents for IPX-100

Reviews:

Related manuals for IPX-100

Brands by name

Popular brands