Aristel IPX-100 Installation Manual Download Page 99

Page: 99 / 114

IPX-100 system installation & configuration

Page-99

TELECOMMUNICATIONS

6-1

System File Management

At this page provides four settings: system firmware update, factory reset, reinstall system

configuration file, backup system settings.

6-1-1

System Firmware Upgrade

Select the firmware file to be installed, click the “Upload” button, upload the file to IPX-100 to

install the firmware.

After the file upload is completed, the file size will be displayed. After confirming the error, click

the “Upgrade” button to perform the firmware update, or click the “Cancel” button to return to

the main page for other operations.

When the installation is complete, the system will automatically restart the system, please be

careful not to perform other setting operations at this time to avoid errors.

After the reboot is complete (about 2 minutes), you need to re-login to the settings page.

Summary of Contents for IPX-100



















































































































Search results

Summary of Contents for IPX-100

Reviews:

Related manuals for IPX-100

Brands by name

Popular brands

Aristel IPX-100, Installation Manual

Search results

Summary of Contents for IPX-100

Reviews:

Related manuals for IPX-100

Brands by name

Popular brands