8-8
3. Inspect the indicator lamp holder for loose sock-
ets, broken wires, or loose connections. Replace as
required.
INSPECTING (250 Utility)
The LCD gauge is not a serviceable component. To
inspect the LCD gauge, see Section 5.
INSTALLING (DVX 300)
1. Connect the indicator lamp connectors; then con-
nect the main harness connector to the ignition
switch.
2. Place the steering post cover onto the mounting
bracket; then secure with the reinstallable rivets.
INSTALLING (250 Utility)
1. Connect the main harness connector to the LCD
gauge; then connect the ignition harness to the
ignition connectors.
2. Place the instrument pod onto the mounting
bracket; then secure with the reinstallable rivet and
two cap screws.
Back to TOC
Back to Section TOC
Next
Back
Summary of Contents for ATV 250 Utility 2009
Page 1: ......
