3-25
3
Removing Right-Side
Components
A. Transmission (DVX 300)
1. Drain the transmission lubricant into a suitable
container; then install the drain plug and tighten to
21 ft-lb.
KM106
2. Remove the drive sprocket cover; then remove the
cap screws and lock plate securing the sprocket to
the driveshaft and remove the sprocket.
KM344A
3. Remove the cap screws securing the transmission
case cover to the transmission; then remove the
cover. Account for the dowel pins and gasket.
KM609A
4. Remove the output driveshaft circlip; then remove
the driveshaft from the transmission case cover.
KM611A
5. Remove the shift shaft; then remove the plug.
Account for one shift cam stopper ball, spring, and
seal/washer.
KM677A
KM619A
6. Remove the shift fork guide shaft; then hold the
shift fork away from the shift cam and remove the
shift cam.
KM620A
Back to TOC
Back to Section TOC
Next
Back
Summary of Contents for ATV 250 Utility 2009
Page 1: ......
