3-8
KM332A
18. Remove the upper rear and lower rear engine
through-bolts to free the engine/transmission; then
raise the front of the engine/transmission suffi-
ciently to allow the engine assembly to be moved
forward enough to disengage the driveshaft.
KM333A
KM325A
19. Swing the rear of the engine/transmission to the
left; then slide the engine out of the left-side of the
frame.
KM329
KM331
Top-Side Components
NOTE: For efficiency, it is preferable to remove
and disassemble only those components which
need to be addressed and to service only those
components. The technician should use discretion
and sound judgment.
NOTE: The engine/transmission does not have to
removed from the frame for this procedure.
Removing Top-Side
Components
A. Valve Cover
B. Cylinder Head
NOTE: Remove the spark plug and timing inspec-
tion plug; then rotate the crankshaft to
top-dead-center of the compression stroke.
AT THIS POINT
To service any one specific component, only limited
disassembly of components may be necessary. Note
the AT THIS POINT information in each sub-section.
Back to TOC
Back to Section TOC
Next
Back
Summary of Contents for ATV 250 Utility 2009
Page 1: ......
