3-21
3
KM373
3. Release the spring pressure and remove the cen-
trifugal clutch assembly from the driven pulley.
KM375
4. Remove the spring and spring seat; then remove
the hub collar.
KM385
5. Remove four pins and bushings from the fixed
face hub; then remove the movable face.
KM384
KM380
Inspecting
1. Inspect the pulley faces for wear, galling, or
grooving.
KM394A
2. Inspect the O-rings on the movable face for nicks,
tears, or swelling.
KM380A
3. Inspect two grease seals in the movable face for
nicks, cuts, or damage.
Back to TOC
Back to Section TOC
Next
Back
Summary of Contents for ATV 250 Utility 2009
Page 1: ......
