User Guide
APconnections, Inc. // 303.997.1300 // www.netequalizer.com
Page 68 of 96
All rights reserved
Copyright © 2014, 2015 APconnections, Inc.
rev. 20150309
sucking up their full 1 megabit allocation with their file download specifically. You just
need to know that their line is clear and that they are consuming the full megabit at this
instant.
To view Instantaneous Bandwidth Usage
(
back
)
From the Management and
Reporting Menu,
Click on ->
View Current Activity
->
[
View Instant Report
].
Select to run the report for an
IP, VLAN, POOL, or IPv6.
For IP, VLAN, or POOL, also type
in the ID to report on.
This is not needed for the IPv6
report. For IPv6 traffic, this
generates a summary report
containing the total bandwidth
consumed by IPv6 traffic on
your network.
You can run the command multiple times by typing in a value greater than 1.
Note: This report must be run per IP address. It cannot be run for an entire subnet.
IPv4 Instantaneous Bandwidth
(
back
)
Results will show last second usage in
bytes per second across two lines:
bandwidth down (inbound), followed by
bandwidth up (outbound), as shown in
the example at right for Pool 3.
IPv6 Instantaneous Bandwidth
(
back
)
For IPv6, the report shows the
tota
l
IPv6
traffic across your network
up
(outbound) followed by the total down
(inbound).
