User Guide
APconnections, Inc. // 303.997.1300 // www.netequalizer.com
Page 4 of 96
All rights reserved
Copyright © 2014, 2015 APconnections, Inc.
rev. 20150309
Thank you for purchasing a NetEqualizer. You are now on your way to achieving "Faster
Networks, with Zero Maintenance, at the Best Prices". Using NetEqualizer in default factory
mode will take care of almost all network congestion and priority traffic flow requirements,
and is the recommended operational mode for most customers. However, NetEqualizer also
offers a wide range of bandwidth control options, while at the same time allowing you to
keep it simple.
NetEqualizer Quick Start Guide
To perform your initial installation, you should reference the NetEqualizer Quick Start Guide.
This contains the basic setup details and minimal settings required to get you up and
running. A hard copy is included in your shipping box. We also email a PDF copy with your
shipping confirmation email.
Note: The NetEqualizer Quick Start Guide is a step-by-step instruction manual.
NetEqualizer User Guide
The NetEqualizer User Guide is intended to walk through NetEqualizer features in more
detail than our NetEqualizer Quick Start Guide. It also includes appendices describing our
add-on modules. Once up and running, it is a good idea to review this entire NetEqualizer
User Guide, to become familiar with all of the advanced features available to you.
Note: The NetEqualizer User Guide is not a step-by-step instruction manual. Select the
feature you are interested in from the Table of Contents and go directly to that section.
For Additional Help
Should you need further assistance setting up your NetEqualizer, please call our Support
Team at 303.997.1300 x102 or email
. If you purchased
through an authorized distributor or reseller, check with them first to determine if they
support you directly.
Key to Reading the User Guide
Entity
Format
Example
GUI Parameter
Name
(SYSTEM PARAMETER
NAME)
Shown in bolded blue. Sometimes
followed by system variable name in
CAPITAL LETTERS.
Bandwidth Up
(TRUNK_UP)
SYSTEM PARAMETER
NAME
System variable names (if shown) are
in CAPITAL LETTERS.
TRUNK_UP
Notes
Notes are shown in blue italics
preceded by "Note:".
Note: For a detailed list of the steps
necessary to get up and running, please
see the
NetEqualizer Quick Start Guide
.
Type in:
values to be
entered
Values that you need to type in are
shown in orange italics preceded by
"
Type in:
".
Type in:
/bridge/bridge-
utils/brctl/brctl rembrain my 99999
Click on ->
Menu
name
Menus are shown in
bold
orange
italics preceded by "Click on->" or "-
>".
Click on ->
Manage Equalizing
->
Configure Parameters
.
Click on ->
[
button_name
]
Buttons are shown in
bold
orange
italics surrounded by square brackets
preceded by "Click on ->" or "->".
Click on ->
[
Start/Stop Equalizing
] ->
[
Start Equalizing
].
