User Guide
APconnections, Inc. // 303.997.1300 // www.netequalizer.com
Page 65 of 96
All rights reserved
Copyright © 2014, 2015 APconnections, Inc.
rev. 20150309
Running Processes
(
back
)
View this report to check out what processes are running on your NetEqualizer. Use this
report to see how much CPU and memory is being consumed by each process, as well as
how long a process has been running. This is useful in troubleshooting efforts.
From the RTR Menus,
Click on ->
Running Processes
.
In the example, I have searched on
“neteq”, and so the process table only shows the neteq process.
RTR Preferences
(
back
)
This RTR menu is used to set the units that you prefer to
see your traffic on the Real-Time, General History, and
Traffic by IP/Pool/VLAN Graphs.
From the RTR Menus,
Click on ->
RTR Preferences
.
The
screen at the right comes up. Select the units that you
prefer used for your graphs, and then
Click on ->
[
Save
Changes
]
to keep your selections, or just click off the
screen to cancel your selections.
Export Data to a Reporting Data Warehouse
(
back
)
Once you have started up RTR reporting, we store up to 4 weeks (1 month) of reporting
data on your NetEqualizer. However, as the reporting data is stored in NetEqualizer memory
(RAM), we have limited our data storage to 1 month.
