Preliminary Technical Data
UG-1828
Rev. PrC | Page 305 of 338
Radio
The
Radio
tab (see Figure 287) lets the user configure the channel enablement, Tx and Rx characteristics.
•
Select channel control mode (hardware enable signals or API command).
•
Select
HIGH
,
MED
, or
LOW
receiver ADC rate.
•
Select active Rx ADC from high performance or low power types
•
Determine the Analog low-pass filter frequency response
•
Select Rx frequency offset correction
•
Select DAC, 3 dB boost mode
•
Select Tx frequency offset correction
•
Select LPF Power consumption for the Tx and Rx.
•
Transmit Data Source can be used to send data from the FPGA or from the internal NCO internal signal source.
Figure 287. Radio Configuration Tab
