Configuring Communication
26
NXD-700i & NXT-CA7 7” Modero Touch Panels
Step 3: Confirm and View Current AMX USB Device Connections
The USB driver information can be confirmed via two different methods:
Via the Control panel (previous steps 1 and 2) or
Via the
Unplug or Eject Hardware
icon from the Taskbar.
1.
Navigate to
Start
>
Settings
>
Control Panel
> and double-click the
System
icon to launch the System
Properties dialog.
2.
Select the
Hardware
tab and click on the
Device Manager
button to launch the Device Manager dialog.
Within the
Device Manager
dialog, the AMX USBLAN device appears under Network Adapters
and has a unique name such as AMX USB LAN LINK #2 (FIG. 25).
The number changes depending on which recognized panel is currently connected.
3.
Confirm that a new USB detection icon (FIG. 26) appears in the lower-right taskbar on the PC display
window.
4.
Double-click on the icon to open the
Unplug or Eject Hardware
window and confirm the AMX USB
LAN LINK has been installed and is operating properly.
5.
Click the
Properties
button to view further information about the installed USB driver.
FIG. 25
Device Manager dialog showing USB device
FIG. 26
USB Properties windows
USB connected touch panel
(showing the recognized panel)
USB
detection
icon
Summary of Contents for NXD-700i
