NXD-700i - Installation
12
NXD-700i & NXT-CA7 7” Modero Touch Panels
5.
Carefully slide the main NXD-700i unit (
B
in FIG. 11) into the conduit box, so that all Mounting Tabs lie
flush against the conduit box (
C
in FIG. 11).
6.
Insert and secure four #4-40 Mounting Screws (included) into their corresponding holes located along the
sides of the NXD.
7.
Place the Faceplate/Trim Ring assembly (
A
in
FIG. 11) back onto the main NXD unit (
B
in
FIG. 11).
Make sure to align the Microphone, Light, and PIR Motion sensor locations to their respective openings
on the front faceplate/bezel.
8.
Reconnect the Ethernet and USB cables (
outside the conduit box
).
Installing the Panel Into Drywall Using Expansion Clips
Expansion clips are mounted through the three oval holes located along the rim of the NXD-700i. As the screw
is tightened, the clip bends toward the insertion hole and into the wall. This bending creates a "grip" on the
wall by either pressing onto the wall or by securing the drywall between the housing and the drywall clip.
Important - When mounting the NXD, the outer frame (Mounting Tabs) must be installed flush against the
mounting surface.
Refer to
SP-2258-01
for detailed installation dimensions (reproduced in FIG. 12).
It is recommended that you cutout the surface slightly smaller than what is outlined in the
installation drawings so that you can make any necessary cutout adjustments.
1.
Prepare the area by removing any screws or nails from the drywall before beginning the cutout process.
2.
Cut out the surface for the NXD Wall Mount unit using the dimensions shown in FIG. 12.
Be sure to cut out the three notches along the sides to accommodate the three corresponding drywall
expansion clips (included).
FIG. 12
NXD-700i Wall Mount panel dimensions using expansion clips
Summary of Contents for NXD-700i
