NXD-700i - Installation
14
NXD-700i & NXT-CA7 7” Modero Touch Panels
11.
Reconnect the Ethernet and USB.
Installing the Panel Into a Flat Surface using #4 screws
Mounting screws (#4-40, included) are secured through two sets of circular holes located at the left and right
sides of the NXD-700i.
Important: When mounting the NXD Wall Mount, the outer frame (Mounting Tabs)
must be installed flush
against the mounting surface.
Refer to
SP-2258-01
for detailed installation dimensions (reproduced in FIG. 14).
It is recommended that you cutout the surface slightly smaller than what is outlined in the
installation drawings so that you can make any necessary cutout adjustments.
1.
Prepare the area by removing any screws or nails from the surface before beginning the cutout process.
2.
Cut out the surface for the NXD Wall Mount unit using the dimensions shown in FIG. 14.
3.
Remove the Faceplate/bezel (
A
in
FIG. 15) from the main NXD unit (
B
in
FIG. 15) by gripping the
faceplate and pulling with gentle outward force.
4.
Thread the incoming Ethernet and USB cables through the surface opening.
Leave enough slack in the wiring to accommodate any re-positioning of the panel.
5.
Connect the Ethernet and USB cables to their corresponding locations along the left side of the panel.
6.
Test the incoming wiring by connecting the panel connections to their terminal locations and applying
power. Verify that the panel is receiving power and functioning properly before finalizing the installation.
FIG. 14
NXD-700i Wall Mount panel dimensions using #4-40 mounting screws
Summary of Contents for NXD-700i
