Setup Pages and Descriptions
49
NXD-700i & NXT-CA7 7” Modero Touch Panels
Time & Date Settings Page
The
Time & Date Settings
page (FIG. 49) allows setting and alteration of the time and date information on the
NetLinx Master. If either the Time or Date is modified on this page and then updated to the Master by pressing
the
Set Time
button, all devices communicating to that target Master will then be updated to reflect the new
information.
Panel Information Page (Cont.)
High Address:
Displays the high address (address count) value for the panel.
High Channel:
Displays the high channel (channel count) value for the panel.
High Level:
Displays the high level (level count) value being used by the panel.
Serial Number:
Displays the specific serial number value assigned to the panel.
Setup Pages Version:
Displays the type and version of the Setup pages being used by the panel.
Screen Width:
Displays the pixel width being used to display the incoming signal on the
Modero panel.
• The maximum available screen width on a NXD-500i panel is 800 pixels.
Screen Height:
Displays the pixel height being used to display the incoming signal on the
Modero panel.
• The maximum available screen height on a NXD-500i panel is 480 pixels.
Screen Refresh Rate:
Displays the refresh rate applied to the incoming signal from the panel.
Default
rate is 60.
Screen Rotation:
Displays the degree of rotation applied to the on-screen image.
Power Up Pages:
Displays the first touch panel page assigned for display after the device is
powered-up.
• This information is taken from the TPD4 project file.
• Most projects begin with a Main page.
Start Up String:
Displays the start-up string.
Wake Up String:
Displays the wake up string used after an activation from a timeout.
Sleep String:
Displays the sleep string used during a panel’s sleep mode.
File System:
Displays the amount of Flash memory available on the Modero panel.
RAM:
Displays the available RAM (or Extended Memory module) on the Modero
panel.
Panel Start Time:
Displays the last time the panel booted.
Bulb Hours:
Displays the total time that the panel has been at full brightness.
FIG. 49
Time and Date Settings page
Summary of Contents for NXD-700i
