Setup Pages and Descriptions
55
NXD-700i & NXT-CA7 7” Modero Touch Panels
For more information on configuring AMX devices for a secure environment, please refer to the guide
Security
Profiles: Configuring AMX Devices For Installation Into a Secure Environment
, available at
www.amx.com
.
System Settings Page
The System Settings page (FIG. 55) sets the Secondary DNS Address information with its corresponding IP
communication parameters, NetLinx Master communication settings, and reads the device number assigned to
the Modero panel.
The elements of the
System Settings
page are as follows:
Security Profile Features (Cont.)
DoD:
• Default Protected Setup Password is “
Amx1234!
”.
• Minimum password requirement is 8 characters with at least one numeric character, one
uppercase character, one lower case character, and one special character, with no
duplicate adjacent characters.
• Remote login uses SSH.
• Remote login user name is “
amx
”.
• Login failure attempt pauses 4 seconds before another login attempt is allowed.
• After 3 consecutive unsuccessful SSH login attempts, login lockout is enabled for 15
minutes.
• Login and logout audit logging is enabled.
• DoD login banner is enabled.
A transition from one security mode to another will reset the Protected/Web Control/
remote login password to the default value for the current security mode (please refer
to the default passwords above). A transition to Secure or DoD mode will disable G4
Web Control. Although the security password features are immediate, a reboot must
occur for all the new security mode features to fully take effect.
FIG. 55
System Settings page)
System Settings Page
Back:
Saves the changes and returns to the previously active touch panel page.
Wired icon:
The icon to the left of the Connection Status Icon displays that the current
connection to the Master is
Wired
(image of three networked computers).
Connection Status icon:
This visual display of the connection status allows the user to have a current
visual update of the panel’s connection status, regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master, which requires a username and
password.
Summary of Contents for NXD-700i
