manualshive.com logo in svg

AMX NXD-700i, Operation/Reference Manual

Share
Download
AMX NXD-700i Operation/Reference Manual Download Page 80

Setup Pages and Descriptions

68

 NXD-700i & NXT-CA7 7” Modero Touch Panels

The options on the Panel Statistics page allow you to track the connection status for the panel. The 

Panel 

Statistics 

page tracks ICSP messages, Blink messages, and Ethernet connection statistics (FIG. 66).    

Features on this page are as follows:  

FIG. 66  

Panel Statistics page

Panel Statistics Page

Back:

Saves all changes and returns to the previous page.

Wired icon:

The icon to the left of the Connection Status Icon displays that the current 
connection to the Master is 

Wired

 (image of three networked computers).

Connection Status icon:

The icon in the upper-right corner of each Setup page shows online/offline state of 
the panel to the master.

• Bright red - disconnected

• Bright green - connected. Blinks when a blink message is received to dark green 

every 5 seconds for half a second then go back to bright green.

• Bright yellow - panel missed a blink message from the master. It will remain 

yellow for 3 missed blink messages and then turn red. It will return to green 
when a blink message is received.

Note

: a Lock appears on the icon if the panel is connected to a secured NetLinx 

Master.

ICSP Messages

Messages sent between the master and the touch panel; it is the protocol they use 
to communicate to each other.

Total

• Received - The total ICSP messages received by the panel.

• Processed - The total ICSP messages processed by the panel.

• Dropped - The total ICSP messages dropped by the panel.

Last 15 Minutes

• Received - The total ICSP messages received by the panel in the last 15 

minutes.

• Processed - The total ICSP messages processed by the panel in the last 15 

minutes.

• Dropped - The total ICSP messages dropped by the panel in the last 15 minutes.

Panel Statistics Page (Cont.)

Blink Messages

The master sends this message once every 5 seconds to all connected devices.

Total

• Received - The total Blink messages received by the panel.

• Missed - The total Blink messages missed by the panel.

Summary of Contents for NXD-700i

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands