SEND_COMMANDs
35
Mio Modero R-4 Remote - Instruction Manual
Button Commands (Cont.)
?BCB
Get the current border color.
Syntax:
SEND_COMMAND <DEV>,"'?BCB-<vt addr range>,<button states range>'"
Variables:
• variable text address range = 1 - 4000.
• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
• custom event type = 1011:
Flag - Zero
Value1 - Button state number
Value2 - Actual length of string (should be 9)
Value3 - Zero
Text - Hex encoded color value (ex: #000000FF)
Text length - Color name length (should be 9)
Example:
SEND COMMAND Device,"'?BCB-529,1'"
Gets the button 'OFF state' border color information.
The result sent to the Master would be:
ButtonGet Id = 529 Type = 1011
Flag = 0
VALUE1 = 1
VALUE2 = 9
VALUE3 =0
TEXT = #222222FF
TEXT LENGTH = 9
^BCF
Set the fill color to the specified color
only if
the specified fill color is not the same as the current color.
Note: Color can be assigned by color name (without spaces), number or R,G,B value (RRGGBB or RRGGBBAA).
Syntax:
"'^BCF-<vt addr range>,<button states range>,<color value>'"
Variable:
• variable text address range = 1 - 4000.
• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
• color value = Refer to
RGB Values for all 88 Basic Colors
on page 58 for more information.
Example:
SEND_COMMAND Device,"'^BCF-500.504&510.515,1,12'"
SEND_COMMAND Device,"'^BCF-500.504&510.515,1,Yellow'"
SEND_COMMAND Device,"'^BCF-500.504&510.515,1,#F4EC0A63''"
SEND_COMMAND Device,"'^BCF-500.504&510.515,1,#F4EC0A'"
Sets the Off state fill color by color number. Colors can be set by Color Numbers, Color name, R,G,B,alpha colors (RRGGBBAA)
and R, G & B colors values (RRGGBB).
?BCF
Get the current fill color.
Syntax:
SEND_COMMAND <DEV>,"'?BCB-<vt addr range>,<button states range>'"
Variables:
• variable text address range = 1 - 4000.
• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
• custom event type = 1012:
Flag - Zero
Value1 - Button state number
Value2 - Actual length of string (should be 9)
Value3 - Zero
Text - Hex encoded color value (ex: #000000FF)
Text length - Color name length (should be 9)
Example:
SEND COMMAND Device,"'?BCF-529,1'"
Gets the button 'OFF state' fill color information.
The result sent to the Master would be:
ButtonGet Id = 529 Type = 1012
Flag = 0
VALUE1 = 1
VALUE2 =9
VALUE3 = 0
TEXT = #FF8000FF
TEXT LENGTH = 9
