Protected Settings Menu
24
Mio Modero R-4 Remote - Instruction Manual
Site Survey
The
Site Survey
page (FIG. 19) is a report of the wireless networks found and the status of their availability to the device. The
Site
Survey
page is accessed by pressing the
Network Scan
button on the second
System Settings
page (page 22).
Joining a Wireless Network
1.
Select
Protected Settings
in the Setup Menu.
2.
Select
System Settings
in the
Protected Settings
Menu.
3.
Press the
Network Scan
button on the second page to open the
Wireless Networks
page. Pushing the
Extended PAN ID
header
sorts the available networks by Extended PAN ID in alphabetical order; pressing the header again will reverse the sorting.
4.
Select the network by pushing it on the touch screen. A pop-up page reading “Do you wish to connect to PAN [PAN number]”
will appear.
To connect to the PAN, press the
Yes
button.
To return to the
Site Survey
page without connecting to the PAN, press the
No
button.
If you do not make a selection within three seconds, the pop-up page will automatically close in three seconds.
5.
Select the
Back
button until you return to the Setup Menu.
ZigBee Diagnostics
The
ZigBee Diagnostics
page (FIG. 20) is a report of the wireless networks found and the status of their availability to the device.
This allows assessment of a network connection to the device while moving through a particular area, for instance. The
ZigBee
Diagnostics
page is accessed by pressing the
ZigBee Diagnostics
button on the second
System Settings
page (page 22)
FIG. 19
Site Survey page
Site Survey
Extended PAN ID
The Personal Area Network ID.
Join
The availability of the network.
Yes
indicates that it is open to join.
Stack Profile
The Stack Profile indicates the capabilities of that wireless network.
FIG. 20
ZigBee Diagnostics page
RF Link Info
Parent ID:
The ID number of the ZigBee gateway currently being contacted by the device. Any number other than “0” (zero)
indicates that the network signal is going through a repeater.