SEND_COMMANDs
29
Mio Modero R-4 Remote - Instruction Manual
SEND_COMMANDs
Overview
Below is a list of SEND_COMMANDs accepted by the Mio R-4 from NetLinx masters. To use these commands, establish a Telnet
session from the PC to the NetLinx master. Additionally, you could use NetLinx Studio 2.4 or the master’s web page to send the
commands.
NOTE:
All text is based on a Unicode index.
Page Commands
Page Commands are used in the NetLinx Programming Language and are case insensitive.
Page Commands
PAGE
Flips to a page with a specified page name. If the page is currently active, it will not redraw the page.
Syntax:
"'PAGE-<page name>'"
Variables:
• page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
Example:
SEND_COMMAND Device,"'PAGE-Page1'"
Flips to page1.
@APG
Add a specific popup page to a specified popup group. Add the popup page to a group if it does not already exist. If the new
popup is added to a group which has a popup displayed on the current page along with the new pop-up, the displayed popup will
be hidden and the new popup will be displayed.
Syntax:
SEND_COMMAND <DEV>,"'@APG-<popup page name>;<popup group name>'"
Variables:
• popup page name = 1 - 50 ASCII characters. Name of the popup page.
• popup group name = 1 - 50 ASCII characters. Name of the popup group.
Example:
SEND_COMMAND Device,"'@APG-Popup1;Group1'"
Adds the popup page 'Popup1' to the popup group 'Group1'.
@CPG
Clear all popup pages from a specified popup group.
Syntax:
SEND_COMMAND <DEV>,"'@CPG-<popup group name>'"
Variable:
• popup group name = 1 - 50 ASCII characters. Name of the popup group.
Example:
SEND_COMMAND Device,"'@CPG-Group1'"
Clears all popup pages from the popup group 'Group1'.
@DPG
Delete a specific popup page from a specified popup group if it exists.
Syntax:
SEND_COMMAND <DEV>,"'@DPG-<popup page name>;<popup group name>'"
Variables:
• popup page name = 1 - 50 ASCII characters. Name of the popup page.
• popup group name = 1 - 50 ASCII characters. Name of the popup group.
Example:
SEND_COMMAND Device,"'@DPG-Popup1;Group1'"
Deletes the popup page 'Popup1' from the popup group 'Group1'.
@PDR
Set the popup location reset flag. If the flag is set, the popup will return to its default location on show instead of its last drag
location.
Syntax:
SEND_COMMAND <DEV>,"'@PDR-<popup page name>;<reset flag>'"
Variables:
• popup page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
• reset flag = 1 = Enable reset flag
0 = Disable reset flag
Example:
SEND_COMMAND Device,"'@PDR-Popup1'"
Popup1 will return to its default location when turned On.
