Mio R-4 Setup
12
Mio Modero R-4 Remote - Instruction Manual
Installing Keypads
To install a new keypad:
1.
Flip and turn the Mio R-4 so that the buttons are facing away from you and the device is upside down.
2.
Holding the Mio R-4 in both hands, place your thumbs on the battery door and push up to slide the battery door free.
3.
Remove the battery.
4.
Unscrew the 6 screw points indicated in FIG. 3.
5.
Turn the unit over so the buttons are facing you.
6.
Lift the top assembly away from the PCB.
7.
If necessary, push out the standard buttons from the front of the top assembly.
8.
Place the new keypad in the top assembly and verify the alignment with the guide posts on the PCB.
9.
Place the top assembly back down on the PCB and turn the unit over again, exposing the 6 screw points.
10. Tighten the 6 screw points.
11. Install the battery, replace the battery door, and slide the door to lock it in place.
FIG. 3
Internal Mio R-4 Components
6 Screw Points
Programming Jack
