SEND_COMMANDs
46
Mio Modero R-4 Remote - Instruction Manual
Button Commands (Cont.)
^JST
Set text alignment using a numeric keypad layout for those buttons with a defined address range. The alignment of 0 is followed
by ',<left>,<top>'. The left and top coordinates are relative to the upper left corner of the button.
Syntax:
"'^JST-<vt addr range>,<button states range>,<new text alignment>'"
Variable:
• variable text address range = 1 - 4000.
• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
• new text alignment = Value of 1 - 9 corresponds to the following locations:
Example:
SEND_COMMAND Device,"'^JST-500.504&510.515,1&2,1'"
Sets the text alignment to the upper left corner for those buttons with variable text ranges of 500-504 & 510-515.
?JST
Get the current text justification.
Syntax:
SEND_COMMAND <DEV>,"'?JST-<vt addr range>,<button states range>'"
Variables:
• variable text address range = 1 - 4000.
• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
• custom event type = 1004:
Flag - Zero
Value1 - Button state number
Value2 - 1 - 9 justify
Value3 - Zero
Text - Blank
Text length - Zero
Example:
SEND COMMAND Device,"'?JST-529,1'"
Gets the button 'OFF state' text justification information.
The result sent to the Master would be:
ButtonGet Id = 529 Type = 1004
Flag = 0
VALUE1 = 1
VALUE2 = 1
VALUE3 = 0
TEXT =
TEXT LENGTH = 0
^SHO
Show or hide a button with a set variable text range.
Syntax:
"'^SHO-<vt addr range>,<command value>'"
Variables:
• variable text address range = 1 - 4000.
• command value = (0= hide, 1= show).
Example:
SEND_COMMAND Device,"'^SHO-500.504&510.515,0'"
Hides buttons with variable text address range 500-504 & 510-515.
^TEC
Set the text effect color for the specified addresses/states to the specified color. The Text Effect is specified by name and can be
found in TPD4. You can also assign the color by name or RGB value (RRGGBB or RRGGBBAA).
Syntax:
"'^TEC-<vt addr range>,<button states range>,<color value>'"
Variable:
• variable text address range = 1 - 4000.
• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
• color value = Refer to
RGB Values for all 88 Basic Colors
on page 58.
Example:
SEND_COMMAND Device,"'^TEC-500.504&510.515,1&2,12'"
Sets the text effect color to Very Light Yellow on buttons with variable text 500-504 and 510-515.
1
4
7
8
9
6
3
2
5
0
Zero can be used for an absolute position
